Asus RS260-E4/RX8 - Manual (Page 73)

ASUS RS260-E4/RX8 4-9
6. Onboard storage setting (3-pin SAS_EN1)
This jumper allows you to enable or disable the onboard LSI1068 SAS
controller.
®
DSBF-D12/2U/SAS SAS setting
SAS_EN1
1 2 2 3
Enable
(Default)
Disable
7. Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS settings when it
becomes corrupted.
To update the BIOS:
1. Prepare a floppy disk that contains the latest BIOS renamed to
"BIOS.WPH" for the motherboard and the Phoenix Phlash16 utility. Make
sure you download the correct BIOSfor your motherboard model and the
BIOS name has been renamed .
2. Set the jumper to pins 2-3.
3. Insert the floppy disk then turn on the system to update the BIOS.
4. Shut down the system.
5. Set the jumper back to pins 1-2.
6. Turn on the system.
®
DSBF-D12/2U/SAS BIOS recovery setting
RECOVERY1
(Default)
Normal BIOS Recovery
1 2 2 3
You can also make the recovery diskette from the ASUS support CD. Refer to
section "5.1.3 ASUS Crashfree BIOS 2 utility" for more information.