4 rackmounting the server – Asus RS260-E4/RX8 User Manual
Page 64
Advertising
Chapter 3: Installation options
3-6
3.4
Rackmounting the server
To mount the server to the rack:
1. Align the server rails with the rack rails and push the server halfway to the
rack.
2. Align a mounting ear with the holes
on a front corner of the chassis,
then secure it with two screws.
3. Attach the other mounting ear to the
other corner of the chassis.
4. Pull the server rail lock, then push
the server all the way to the depth of
the rack.
Make sure that the mounting ear
and the rack screw holes align.
5. Drive a screw on the mounting ear
to secure the server in place.
Advertising