Rear half – Asus RS260-E4/RX8 User Manual
Page 24
Advertising
Chapter 2: Hardware setup
2-4
Rear half
3. Firmly hold the rear half of the
top cover, then remove it from the
chassis.
To remove the rear half of the top cover:
1. Loosen the thumbscrew that
secures the top cover on the rear
part of the chassis.
You need to remove the front half of the top cover before you can remove the
rear half of the top cover. Refer to section “2.1.2 Removing the top cover (front
half)” for instructions.
The barebone server without the top
cover is shown on the right.
Thumbscrew
2. Remove the screw on the rear half
of the cover.
Advertising