Asus RS260-E4/RX8 - Manual (Page 41)

ASUS RS260-E4/RX8 2-21
3. Unscrew the metal cover opposite
the PCI-X slot that you want to use.
4. The card golden connectors should
match the notches on the slot.
Then, firmly push down the card
until it is completely seated on the
slot.
5. Secure the card bracket with a
screw.
6. Connect power or signal cable(s) to
the card, if applicable.
Repeat steps 3 to 6 if you wish to install other PCI-X cards.
7. Before re-installing the PCI cage
into the chassis, check that all
cables on the PCI cage bay are
properly connected and routed.
Cables on the PCI cage bay