Xylem CG 853P - Manual (Page 65)

Maintenance, cleaning, disposal
141
5.1.2 Replacing the roll of printer paper
Note
Only use original SCHOTT HQ thermal paper. Information
on this is given in the SCHOTT general catalog.
1 Switch off the printer (Print LED lights up red).
2 Open the lid of the printer (1).
3 Remove the empty roll of paper (2).
4 Insert the new roll of paper:
– Fold the leading edge of the paper inwards and
thread it into the printer (3) from underneath.
– Press the <feed> Print key (paper feed).
5 Close the lid of the printer (1).
1
3
2