Xylem handylab OX 12 - Manual (Page 35)

handylab Ox 12 Operation
35 ba75369e04 01/2011
Note
If you want to search for a certain element (e.g. date), proceed as follows:
Outputting stored
data to the
interface
Note
You can cancel the transmission with <M> or <RUN/ENTER>.
After the instrument number, the printout contains the complete storage con-
tents in ascending order of the storage location numbers.
1 Using <RUN/ENTER>, select the element (e. g. date).
2 Press <
▲> or <▼> repeatedly until the required date appears on the
display.
After approx. 2 s the temperature of the displayed measured value
appears.
1 Press the <RCL> key repeatedly until Sto SEr appears on the dis-
play.
2 Press the <RUN/ENTER> key.
The complete storage content is transmitted to the interface; during
the data transmission the numbers of the currently transmitted stor-
age locations run through. After the data transmission, the measuring
instrument automatically switches to the measuring mode.
Store Auto
Ident
S 1
LoBat
Tref25
nLF
/ K %
Sal
°
AR
TP
C
M
m
% mg/l
cm
S/ cm
cm 1/
° F
ARng Cal Lin
Tref20
Sal TDS
mbar
O UpH
mV/pH
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Year
R
S t o
S E
RCL