Xylem SDI-12 Data Logger iLink - Manual (Page 27)

i Quest (NZ) Ltd - PO Box 15169 HAMILTON Tel: +64 7 957 8160 - Fax: +64 7 957 8162 - Email:
iLink - Configuration and Support Utility 27
[email protected]
4.2 Loading a Profile
[File] [Open Profile]
iLink always starts up with the last profile used already loaded (if no profiles have been saved, the default
profile will be loaded). If necessary, a different profile can be loaded. Selecting [File][Open Profile] will
bring up the Open Profile dialog. The currently loaded profile (if any) is indicated by the red arrow. To
view the details for any listed profile, click on the profile and then click the [
Details ] button. The first screen
shot below shows the current profile is 4483. The second screen shot shows the details for this profile.
A ‘double mouse click’ on any profile will load that profile into iLink