Xylem SDI-12 Data Logger iLink User Manual
Page 60
60
iLink - Configuration and Support Utility
iQuest (NZ) Ltd - PO Box 15169 HAMILTON Tel: +64 7 957 8160 - Fax: +64 7 957 8162 - Email: [email protected]
The new file is stored in a buffer in the connected device and the Executive file is not updated until the
[
Start Flash Upgrade
] button is clicked.
A final confirmation is required before the new flash executive is activated within the device.
Whilst the flash upgrade is in progress, the status light on the device will flash green and red.
When the flash upgrade is completed, the status light will resume its normal state of a steady flashing
green.
Following an upgrade, disconnect from the device and reconnect. You will also note that the ROM version
number changes, confirming that the process has completed successfully.
ROM Version