Xylem SDI-12 Data Logger iLink - Manual (Page 59)

i Quest (NZ) Ltd - PO Box 15169 HAMILTON Tel: +64 7 957 8160 - Fax: +64 7 957 8162 - Email:
iLink - Configuration and Support Utility 59
[email protected]
The flash executive files are stored in the default firmware directory, /iLink/firmware/, and are identified by
the filename extension .fls.
Select the file to upload to the datalogger.
Click the [
Load ] button in the ‘Executive Firmware Update’ panel to begin the upload. You will be
prompted to confirm the upload before the file transfer begins.
During the update process, a progress indicator provides visual feedback of the status of the upload
Once the update is complete, a dialog will be shown confirming that the update was successful.