Xylem SDI-12 Data Logger iLink - Manual (Page 64)

64 iLink - Configuration and Support Utility
iQuest (NZ) Ltd - PO Box 15169 HAMILTON Tel: +64 7 957 8160 - Fax: +64 7 957 8162 - Email: [email protected]
APPENDIX B
Sample Modem Configuration Settings
The following example, for the Zoltrix 14400 Fax/Modem, is taken from the ‘modems.ini’ file located in the
root iLink folder.
[Zoltrix 14400 FAX/modem]
InitCmd=ATZ^M
DialCmd=ATDT
DialTerm=^M
DialCancel=^M
HangupCmd=DTR
ConfigCmd=AT&F^M|AT\J0\Q3\N3\V0&W^M
AnswerCmd=ATA^M
OkMsg=OK
ConnectMsg=CONNECT
BusyMsg=BUSY
VoiceMsg=VOICE
NoCarrierMsg=NO CARRIER
NoDialToneMsg=NO DIAL
RingMsg=RING
LockDTE=TRUE
DefaultBaud=19200
To view all currently supported modems with their configuration settings, open up the modems.ini file with
a text-editor such as NotePad.
If you need to insert alternative modems, the entry must match the format shown above. You must also
insert an entry in the [Index] section of the file, in the appropriate place.