5 starting the wql-log program, Starting the wql-log program – Xylem WQL-pH pH DATALOGGERS User Manual
Page 27
Advertising
WQL-pH
Commissioning
101
ba75821e01
10/2009
3.5
Starting the WQL-Log program
Connection to
logger
1
Start the WQL-Log program.
The Login window appears.
2
If the WQL-pH logger is connected to the PC via a USB cable and
should communicate with the WQL-Log PC program:
Confirm with OK. The WQL-Log program searches for the connection
with the logger.
3
Confirm with OK. The data window appears. During the initial
commissioning it does not yet contain data to be graphically
displayed.
Advertising