Xylem WQL-pH pH DATALOGGERS - Manual (Page 49)

WQL-pH Logging
123 ba75821e01 10/2009
4 Confirm with OK.
5 If the logger contains new data:
The prompt to read in the data appears.
6 Confirm the reading in of the data with OK.
The reading process can take some time (depending on the number
of datasets to be read in).
7 When the reading of the measured values is completed, a message
appears (confirm with OK) and the prompt to erase the measured
value memory.
8 Press OK or Cancel.
The data window appears with a graphic of the read-in data, no
matter whether or not the data memory was erased.