Time (see section 7.3 s, Etting, Parameters – Xylem WQL-pH pH DATALOGGERS User Manual
Page 42: Starting, Logging, Section 7.3 s
Advertising
Logging
WQL-pH
116
ba75821e01
10/2009
7.3
Setting the parameters and starting the logging job
To change one or several of the above listed settings proceed as follows:
1
Connect the WQL-pH logger to the PC with the USB cable.
2
Start the WQL-Log program.
The Login window appears.
3
Confirm with OK. The WQL-Log program searches for the connection
with the logger.
4
Confirm with OK.
5
If the logger contains new data:
The prompt to read in the data appears.
Advertising