Xylem PH3210 FIELD PH METER - Manual (Page 23)

pH 3210 Operation
23 ba75793e02 12/2008
4 Change and confirm the setting with <
▲><▼> and <ENTER>.
The minutes are highlighted.
5 Change and confirm the setting with <
▲><▼> and <ENTER>.
The seconds are highlighted.
6 Change and confirm the setting with <
▲><▼> and <ENTER>.
The time is set.
7 If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8 If necessary, select and set the Date with <
▲><▼> and
<ENTER>.
9 To make further settings, switch to the next higher menu level
with <F1>/[Back].
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.