Xylem VARIO WATERPROOF PH METER - Manual (Page 14)

Commissioning VARIO pH
14 ba75373e04 07/2006
3.4.2 Electrode without temperature sensor
Connect an electrode without an integrated temperature sensor to the
VARIO pH as follows:
VARIO pH with
connected
electrode
Note
When using an electrode without temperature sensor it is possible to connect
an external temperature probe (see section 3.4.4).
1 Connect the adapter to the meter (see section 3.4.1).
2 Connect the plug of the electrode to the adapter.
3 If necessary, connect the two banana plugs of the external
temperature probe to the lateral sockets on the VARIO pH. The
polarity is arbitrary.
2
h:min
1
CLR
LoBat Day.Month min:s Ident Lap
mV
pH
8
RESET LAP
2 5
7 9 4
ESC
d
CAL MEM
C
Electrode
DIN adapter