Xylem VARIO WATERPROOF PH METER - Manual (Page 32)

Operation VARIO pH
32 ba75373e04 07/2006
Setting the date
and time
1 Switch on the meter with < ( >.
After a short display test, a measured value is displayed.
2 Press < U > to indicate the time and date on the display.
The U status indicator appears.
3 Select the hours or minutes with < 3 > or < 4 > [<Hours> or
<Minutes>].
The
h symbol flashes.
4 Set the time with < > > and < < >.
5 Using < 5 > or < 6 >, select the [<Day> or <Month>].
The d symbol flashes.
6 Set the date with < > > and < < >.
7 Confirm the setting with < g >.
The year is displayed.
8 Set the year with < > > and < < >.
9 Confirm the setting with < g >.
The time and date are displayed again.
10 Switch to the measured value display with < E >.
or
Set the alarm time (see section 4.6.2).
CLR
Ident
C
pH
mV
d
MEM
CAL
LoBat min:s Lap
RESET
LAP
ESC
0 3
1 1 0 9
5
h:min Day.Month
1