Xylem VARIO WATERPROOF PH METER - Manual (Page 30)

Operation VARIO pH
30 ba75373e04 07/2006
If all memory locations are occupied, the
StoFull
message appears. You
have the following options:
4.5.2 Displaying measured data from the memory
Stored measurement datasets always have the main measured value in the
upper display line and a variable display of further elements of the
measurement dataset in the lower line.
Display stored datasets as follows:
Saving the current measured value.
The oldest measured value (memory location 1)
will be overwritten by this Press < g >
Returning to the measuring mode without saving Press < E >
Erasing the entire memory see section 4.5.3.
1 Display the memory with < M_ >.
The r status indicator appears on the display.
The measurement dataset that was saved last is displayed.
2 Scroll through the stored datasets with < < > and < > >.
3 If necessary, display further elements of the dataset (ID number,
date, time, temperature) with <
§ > [Element of the measurement
dataset].
When scrolling further, this element is displayed in the second line
together with the measured value.
4 Scroll through the stored datasets with < < > < > >.
5 If necessary, display further elements of the dataset (ID number,
date, time, temperature) with <
§ > [Element of the measurement
dataset].
6 Switch to the measuring mode with < E >.
1
Day.Month
3
MEM
CAL
C
pH
8
LoBat min:s Ident Lap
mV
h:min
RESET
LAP
ESC
7 0 0
1 n
d
CLR