Xylem MULTI 3400 MULTI-PARAMETER METERS - Manual (Page 42)

Operation Multi 3400i
42
4.6 Saving data
The Multi 3400i portable measuring instrument has an internal data
memory. It can store up to 500 datasets.
A complete data record consists of:
z Number of the storage location
z Date/time
z Measured values of the probes connected
z Temperature values of the probes connected
z Temperature measuring procedure
z ID number
You can transmit measured values (data records) to the data storage
in two ways:
z Save manually
z Switch on AutoStore (Int 1), see page 44)
4.6.1 Saving manually
You can transmit a measured value to the data storage as follows:
1 Press the <STO> key.
The current number (location number No.) of the next free stor-
age location appears under the current measured value on the
display.
2 Confirm with <RUN/ENTER>.
The display switches to entering the ID number.
Ident
K TP
° C
4 2
Tref20
Lin Cal
8
1
S
Sal O U
% mg/l
mV/pH
1/cmSal
AutoCal DIN Tref25
nLF AutoCal TEC RCL
Auto
LoBat ARng AR
Time Baud
Day.Month
Year
mbar
TDS
cm M
° F
/ %
S/ m cm
4
9 9 6
pH
No.
Store