Xylem MULTI 3400 MULTI-PARAMETER METERS - Manual (Page 43)

Multi 3400i Operation
43
Message
StoFull StoFull StoFull StoFull
This message appears when all of the 500 storage locations are occu-
pied.
You have the following options:
3 Using <
▲> <▼>, enter the required ID number
(1 ... 999).
4 Confirm with <RUN/ENTER>.
The measured values are stored. The instrument changes to
the measuring mode.
No.
K TP
° C
4 2
Tref20
Lin Cal
8
1
S
Sal O U
% mg/l
mV/pH
1/cmSal
AutoCal DIN Tref25
nLF AutoCal TEC RCL
Auto
LoBat ARng AR
Time Baud
Day.Month
Year
mbar
TDS
cm M
° F
/ %
S/ m cm
2
9 9 6
pH
Store
Ident
Saving the current measured value.
The oldest measured value (storage location 1)
will be overwritten by this Press
<RUN/ENTER>
Returning to the measuring mode without saving press any key
Outputting the data storage see
section 4.6.3
Clearing the memory see
section 4.6.4