ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 19)

15
2.4.4 Speech buttons
Use the speech buttons to record a message and adjust the volume.
Button User functions
Press to record a voice message. For further information, see “Operating
the family message centre” in section 6.5.
Press this button to listen to messages.
Keep this button pressed to adjust the volume of the internal
loudspeaker.
The following levels are available:
“Loudspeaker off”
“Loudspeaker level 1”
“Loudspeaker level 2”
“Loudspeaker level 3”
“Loudspeaker level 4”
2.4.5 Function keys
The function keys help you to operate your system. For example, you can activate the user
functions by the press of a button, without having to enter the user PIN.
IMPORTANT:
Before you can use the function keys, they have to be released. -> Installer menu
2.5 State of LCD display
The state of the LCD display varies according to the status and number of partitions
defined. If you have defined only one partition in your ABUS wireless alarm system,
the LCD display shows the name of this partitions, the time and the date.
If you have defined two or three partitions, the LCD display shows the name of the
system, the time, the date, and the state of each partition. The LCD shows a letter for
each partition. The letters indicate the current state of the partitions.
A: External activation of
partition (AWAY) N: Partition not ready
S: Partition activated internally
(STAY) R: Partition ready
a: Partition in alarm state