ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 22)

18
3.1.2 Stay arming
Internal activation arms only the detectors of the outer skin – for example, door/window
contacts and glass breakage detectors (or detectors defined in the installer menu). It
enables you to move freely within a monitored object while the system is internally
activated.
Stay arming
1. Check the READY LED to see if the system can be activated internally.
2. Enter your user PIN and press . All partitions assigned to this PIN are
now internally activated.
IMPORTANT:
If released (-> Installer menu -> Quick arm), just press the internal arm button to
arm the system internally. You do not have to enter your user PIN.
3. If necessary, leave the object and close the door. The operating panel beeps
during the exit delay time. The ACTIVE LED flashes and the OMIT LED lights
up.
IMPORTANT:
If you press during the exit delay period, the announcements and beeps on the
operating panel are cancelled.
If you press the internal arm button twice, the entry delay is cancelled – i.e., an
entry/exit zone becomes an instant zone.
4. After the exit delay time expires, the ACTIVE LED lights permanently and the
following message is announced: “System armed at stay” If the system
cannot be activated, the message “Not ready to arm” is played, as described
in section 3.1.1 (“External activation”).