ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 46)

42
3 View
1 Trouble
Check here if the ABUS wireless alarm
system detects a problem in the system. If
there is a fault, the FAULT LED flashes.
2 Alarm memory The last five alarm situations are stored in the
system and displayed in the alarm memory.
3 Partition status The present state of a partition is displayed.
4 Zone status The present state of all zones in the system is
displayed.
5 Eventlog All important system events are displayed with
date and time.
6 Information The following information is displayed:
[1] Service information:
Display of any previously entered service
information.
[2] System version
4 Maintenance
1
Testing This function allows the Grand Master to test the
following system elements for three seconds:
[1] LCD + buzzer
[2] Internal sounder
[3] External sounder
[4] Loudspeakers
[5] Battery
[6] Battery voltage (test for batteries only)
2 Walk test Use the walk test to make a simple operation
check of selected zones in your system.
3 Chime control Checks the system chime and its properties.
4 Buzzer control Checks the system buzzer and its properties.