ABUS FU9001 Privest Wireless Alarm Base Set Operating instructions - Manual (Page 36)

32
Chapter 6 Main settings under “user functions”
On the ABUS wireless alarm system, you can make a wide range of settings under
“user functions” in addition to entering and deleting user codes (see chapter 5). This
chapter describes the main settings (setting time and date, entering Follow Me numbers,
creating weekly schedules, activating/deactivating local announcements, managing local
voice messages, and programming macro buttons).
The complete user functions menu is shown in chapter 7.
To go to the user functions menu, just press .
6.1 Setting system time and date
In order that the ABUS wireless alarm system can operate properly, you have to set
the correct time and date. Only the Grand Master and the Manager can make these
settings.
To enter/change the system time:
1. Under user functions, press [6] for Clocks.
2. Then enter the Grand Master PIN or the Manager PIN and press .
3. Select [1] for the system time.
4. Enter the correct time in 24-hour format.
You have two options: You can enter the time via the numeric buttons. OR:
Use the buttons to set all numbers separately. In this case,
you have to press the buttons to select the position of the
number you want to change.
5. Press to confirm your input.
To enter/change the system date:
1. Under user functions, press [6] for Clocks.
2. Then enter the Grand Master PIN or the Manager PIN and press .
3. Select [2] for the system date.
4. Enter the date. Use the buttons to set the corresponding
numbers. To switch between settings for date, month and year, press the
buttons.
5. Press to confirm your input.