Alpha Technologies Cordex CXPS-D 48-2500_5000A User Manual
Page 34
Advertising
![background image](/manuals/317393/34/background.png)
-5HY%
5.4.2 Installing the Inter-bay Cables
A new expansion bay arrives with the CAN bus and signal cables ready for connection to the existing bay.
Inter-Bay Signal Cables
1. Locate the connector ends of the wiring harnesses in the existing bay and the expansion bay.
2. Join the two connectors together.
3. Tie-wrap the connector cable to the shelf as shown in Figure 21.
&RQQHFWRU
7LHZUDS
)LJXUH ² ,QWHUED\FDEOHV
6LJQDOFDEOHV
DQGFRQQHFWRU
&$1EXVFDEOH
DQGFRQQHFWRU
)LJXUH ² ,QWHUED\VLJQDOFDEOHFRQQHFWRUV
Advertising
This manual is related to the following products: