Alpha Technologies Cordex CXPS-D 48-2500_5000A - Manual (Page 49)

 -5HY%
)LJXUH ² %UHDNHUGLVWULEXWLRQPRGXOHEHIRUHORDGFDEOHVDUHLQVWDOOHG
/RDG  FRQQHFWLRQV
/RDG  ±&RQQHFWKHUHRU
FRQQHFWWRH[WHUQDOUHWXUQ
EXVEDULILQVWDOOHG
)LJXUH ² %UHDNHUORDGFDEOHDQGUHWXUQFRQQHFWLRQV
&DEOHWLHEDU
3URWHFWLYHQHJDWLYH
WHUPLQDOFRYHU
&LUFXLWEUHDNHU
JXDUG
4. Connect the load return cables to the (+) side of the bottom breaker (Figure 37) or to the external battery
return bus bar (Figure 33).
5. Connect the -48V load cables to the circuit breaker bank starting with the bottom position.
6. Tie cables to the cable tie bars at the back of the power system (Figure 36 shows the location).
7. Add additional circuits going from bottom to top tying in the additional layers on top of the previous layers.