Alpha Technologies Cordex CXPS-D 48-2500_5000A User Manual
Page 36
Advertising
-5HY%
5.4.3 Cutting and reinstalling rear Kydex covers
Before reinstalling the covers, trim the sides to clear the inter-bay bus bars:
1. Use wire cutters to cut through the second row of holes on the adjacent sides of the Kydex covers.
2. Replace the covers and attach them to the cover support brackets (see Figure 19).
3. Join the covers together with the plastic pins and the Kydex strip shown in Figure 25.
&XWWKURXJKVHFRQG
VHWRIKROHV
)LJXUH ² 5HLQVWDOODWLRQRIUHDU.\GH[FRYHUV
Advertising
This manual is related to the following products: