MoTeC M8 - Manual (Page 53)

MoTeC E.M.P. Software 51
Making Adjustments
Up / Down Adjustment
Up or Down adjustments may be made to the selected table value using the
PgUp and PgDn keys.
Fast adjustments may be made by pressing the PgUp or PgDn keys in
conjunction with the Ctrl key. This will increment the value by ten times the
normal amount.
If the PgUp or PgDn keys are held down the value will continue to change
until the key is released.
Setting the new Value
When the desired adjustment has been made the new value must be "Set" by
pressing the Enter key, this stores the new adjustment in the ECUs
programmable memory.
If the cursor is moved before pressing the Enter key the value will revert to
its previous unadjusted value.
Quick Lambda
The Quick Lambda feature allows the Fuel - Main Table values to be
adjusted to the correct lambda by simply pressing the Q key. This feature
uses the Wide Band Lambda reading and the value from the Misc Functions
- Lambda Control Table to calculate the new fuel table value. The
adjustment is made to the value closest to the current engine operating point.
(Requires Advanced Tuning).
This feature may be performed from the Fuel - Main Table or from the
Ignition - Main Table.
This feature requires a Wide Band Lambda sensor or meter to be
connected to the ECU.
Direct Entry
The table values may also be entered directly using the number keys followed
by the Enter key.
Mathematical operations may also be performed on the currently selected
value or to the whole table, Press the F1 key while the direct entry screen is
shown for details.