MoTeC M8 - Manual (Page 55)

MoTeC E.M.P. Software 53
Warning Alarms
If the Warning Alarms have been set then a warning screen will be displayed
if any sensor goes outside its alarm limits. This can be particularly useful for
automatically monitoring engine temperature during a dyno session.
Any alarm may be disabled by setting its limit value to zero.
Function Menu
The Function Menu may be displayed by pressing the F9 key.
The Function Menu allows selection of various functions such as :
Compare Files
Overall Trim Table
Interpolate Vertical or Horizontal Column
Copy Column Right
Read Table from another File
Many Others
Help is available on each item by positioning the selection bar on the item of
interest and pressing the F1 key.
Graph Table
The calibration data may be graphed by pressing the G key or by selecting
Graph from the Function Menu.
To change the view perspective press the F8 key while viewing the graph.
View Screen
The View Screen displays detailed engine and sensor data and allows
resetting of the Maximum RPM and the Fuel Used.
The View Screen may be viewed by pressing the V key or by selecting Show
View Screen from the Function Menu.
Trims Screen
The Trims Screen displays a break down of various trims and compensations
applied to the Fuel, Ignition and Boost.
The Trims Screen may be viewed by pressing the T key or by selecting Show
Trims Screen from the Function Menu.