MoTeC M84 - Manual (Page 11)

MoTeC Overview 9
Digital Input Functions
The following functions are setup in the Digital Input Functions menu
• Speed Measurement
• Period Measurement
• Pulse Measurement
• Dual
RPM Limit
• Air Conditioner Request
• Ignition
Switch
• Brake
• Logging
Enable
• Clutch
• Overrun Boost Enhancement
• Traction Control Enable
• Ground Speed Limiting
• Power
Steering
Auxiliary Output Functions
The following functions are setup in the Auxiliary Output Functions menu
• Boost
Control
• Idle Speed Control
• Aux Table Controlled Output
• Tacho
Signal
• Stepper Idle Speed Control
• Lambda
Sensor Heater
• Fuel Pump Control
• Thermatic Fan Control
• Air Conditioner Fan Control
• Air Conditioner Clutch Control
• RPM / Load Table Output
• Gear Change Light Output
• Fuel Used Pulse Output
• Slip
Warning Output
• Alternator
Control
• Spray Bars Output
• Status
Output
• Thermo Pump