MoTeC M84 - Manual (Page 59)

MoTeC ECU Manager Software 57
The cursor may be moved using the arrow keys, or by pressing the Spacebar
which will automatically move the cursor to the current engine operating point.
Note that the table does not show all values at once. To view the additional
values move the adjustment cursor to the edges of the table using the arrow
keys, this will cause the table to scroll and show the hidden values.
Make sure the engine is “On Site”
For adjustments to affect the current engine operation the engine operating
point must be at the centre of the selected site. The Adjust Table object
provides Indicators and a Target to assist in this.
Table Indicators
Indicators are shown at the top and side of the table (the black triangles). The
indicators show the current engine operating point and therefore indicate
which table value (or values) the ECU is currently using. The indicators must
point to the same site as the adjustment cursor for any adjustments to the
current engine tuning.
The site that is closest to the current operating point is also indicated by a red
rectangle.
Table Target
A target is shown at the left of the table. This allows more accurate positioning
of the engine operating point.
For best calibration the indicator should be within or close to the centre
rectangle, this ensures that the ECU tuning is determined mainly by the site
being adjusted and not by the adjacent sites.