MoTeC M84 - Manual (Page 31)

MoTeC Initial Setup 29
Initial Setup
Before attempting to start the engine the setup parameters must be correct.
Use the MoTeC ECU Manager software to adjust the setup parameters.
Preferably start with a calibration file from a similar engine as this will make
setup faster and easier.
Main Setup
Injectors
Injector Scaling (IJPU)
Injector Current
Injector Battery Compensation
Refer to the ECU Manager help screens for details.
Calculation Methods
Efficiency Calculation Method.
Load Calculation Method.
Refer to the ECU Manager help screens for details.
Number of Cylinders
CYLS 4 Stroke engines: use positive numbers e.g. 8 for 8 cyl.
2 Stroke engines: use negative numbers e.g. -2 for 2 cyl.
Rotary engines: use -2 for 2 rotor and -3 for 3 rotor.
Trigger Setup
Ref / Sync Mode (REF)
Crank Reference Teeth (CRT)
Crank Index Position (CRIP)
These parameters are dependant on the type of trigger system. Refer to the
appropriate MoTeC Trigger drawing or Ignition System drawing.