MoTeC M84 - Manual (Page 61)

MoTeC ECU Manager Software 59
pressing the F8 key. The adjustment is made to the value closest to the
current engine operating point.
This feature may be performed from the Fuel - Main Table or from the
Ignition - Main Table.
Quick Lambda can also be used to trim the Fuel - Individual Cylinder
Tables by pressing the Q key while the particular table is selected.
Note that this feature requires a Wideband Lambda sensor or meter to be
connected to the ECU.
Set Indicators (*)
An * will appear next to items that have been set, with the exception of tables
that are dependent on the engine operating point where a * will only appear if
the engine operating point corresponds to the currently selected site. The *
indicates that the point has been tuned.
The 's may be cleared individually or all * may be cleared at once.
To clear an individual * press the Delete key. To clear ALL * select Clear
ALL* from the Tools menu.