J&M GC-31T Assembly User Manual
Page 10
Advertising
GC31
t
-1 G
rain
C
art
a
ssembly
-10-
STEP - 18
STEP - 17
Attach the OAS lower middle panel. Use (5) 8.8 M10 x 25 MM serrated flange hex head bolts and (5)
M10 serrated flange hex head nuts to attach the OAS lower middle panel. Only insert hardware into
the holes that are inside the outlined area in the figure above.
Attach the AS lower middle panel. Remove the 2 temporary bolts and use (10) 8.8 M10 x 25 MM ser-
rated flange hex head bolts and (10)M10 serrated flange hex head nuts to attach the AS lower middle
panel. Only insert hardware into the holes that are inside the outlined area in the figure above.
Advertising