J&M GC-31T Assembly User Manual
Page 11
Advertising
GC31
t
-1 G
rain
C
art
a
ssembly
-11-
STEP - 20
STEP - 19
Attach the front AS lower middle panel. Use (6) 8.8 M10 x 25 MM serrated flange hex head bolts and (6)
M10 serrated flange hex head nuts. Only insert hardware into the holes that are inside the outlined
area in the figure above. For the scale option leave out hardware that is inside of the circle.
Attach the front OAS lower middle panel. Remove the two temporary bolts and use (11) 8.8 M10 x 25
MM serrated flange hex head bolts and (11)M10 serrated flange hex head nuts. Only insert hardware
into the holes that are inside the outlined area in the figure above.
Advertising