J&M GC-31T Assembly - Manual (Page 24)

GC31
t
-1 G
rain
C
art
a
ssembly
-24-
STEP - 46
STEP - 45
Attach the gearbox top plate. Use (12) M10 x 25MM serrated hex head bolts and (12) M10 ser-
rated hex flange nuts to attach the gearbox top plate to the shell assembly.
Attach the {1} rear slope splice plate & the {2} side slope splice plate. Use (14) M10 x 25MM
serrated hex head bolts and (14) M10 serrated hex flange nuts to attach them to the gearbox as-
sembly. Attach the {3}inside sheddar panel splice plate. Use (6) M10 x 25MM serrated hex head
bolts and (6) M10 serrated hex flange nuts for attachment. tighten all splice plates and lower
panels.
1
2
3