J&M GC-31T Assembly - Manual (Page 40)

GC31
t
-1 G
rain
C
art
a
ssembly
-40-
STEP - 78
STEP - 77
Install all three windows. The top window assembly consists of the window and window seal. The front
and rear lower windows take (4) M10 x 25MM serrated hex head bolts and (4) M10 locking nuts, win-
dow, window seal, (2) inner brackets, and (2) outer brackets. Start by inserting the window seal into the
opening followed by the window. Then attach both the inner and outer brackets with their hardware. The
window should be on the inside of the cart when the installation is finished.
Install U-joint guard. Use (2) M10 serrated hex head bolts and (2) M10 serrated hex flange nuts to attach
the U-joint guard to the gearbox assembly.