J&M GC-31T Assembly - Manual (Page 30)

GC31
t
-1 G
rain
C
art
a
ssembly
-30-
STEP - 57
STEP - 58
Install the Rear OAS Top Panel. Use (26) 8.8 M10 x 25 MM serrated flange hex head bolts and (26) M10
serrated flange hex head nuts for installation. D
O NOt
insert hardware into the outlined area in the figure
above.
Install the clean out door. Use (4) M10 x 25MM serrated hex
head bolts and (4) M10 serrated hex flange nuts to attach the
clean out door to the shell assembly.