J&M GC-31T Assembly - Manual (Page 27)

GC31
t
-1 G
rain
C
art
a
ssembly
-27-
STEP - 52
STEP - 51
Attach the OAS Front Top Panel. Use (14) 8.8 M10 x 25 MM serrated flange hex head bolts and (14) M10
serrated flange hex head nuts for installation. D
O NOt
insert hardware into the outlined area in the figure
above.
Attach the OAS Center Top Panel. Use (19) 8.8 M10 x 25 MM serrated flange hex head bolts and (19) M10
serrated flange hex head nuts for installation. D
O NOt
insert hardware into the outlined area in the figure
above.