J&M GC-31T Assembly - Manual (Page 18)

GC31
t
-1 G
rain
C
art
a
ssembly
-18-
STEP - 34
STEP - 33
Attach the AS Front Upper Middle Panel. Use (25) 8.8 M10 x 25 MM serrated flange hex head bolts and
(25) M10 serrated flange hex head nuts for installation. D
O NOt
insert hardware into the outlined area in
the figure above.
Attach the Rear OAS Upper Middle Panel. Use (21) 8.8 M10 x 25 MM serrated flange hex head bolts
and (21) M10 serrated flange hex head nuts for installation. D
O NOt
insert hardware into the outlined
area in the figure above.