Analog Way Di-VentiX II - Manual (Page 18)

• GENLOCK:
Connectors: 2 x Female BNC (in & out).
Function: available only in framelock mode.
Analog SD or HD active loopthrough.
• DEVICE SYNC:
Connectors: RJ45
Protocol: Proprietary Protocol.
Function: Synchronisation of several machines
(multi machine Soft Edge Blending).
• SEB LINK:
Connectors: InfiniBand (The connector is removed from the serial
number CV#831)
Protocol: N/A
Function: Non available
• OPTIONAL AUDIO OUTPUT (OPT-iX-A):
Connector: Outputs 1 (Main) and 2 (Prelist): 2 Balanced or
unbalanced mono/stereo outputs (on 5-pin MCO
male connector).
Vo max: Unbalanced = + 18 dBu (+12 dBu with 300Ω load).
Balanced = + 24 dBu (+18 dBu with 600Ω load).
Zo = 600 Ω balanced.
Zo = 300 Ω unbalanced.
G = 0 dB nominal.
G = + 6 dB / - ∞ adjustable with Master volume.
• OPTIONAL VIDEO OUTPUT OPT-8044VO (3G-SDI):
Connectors: 1 x Female DB9, 1 x Female BNC, 1 x Female DVI-D.
SD-SDI: Female BNC.
Formats: SMPTE 259M.
Data rate: 270 Mbps serial digital.
Impedance: 75 ohms.
HD-SDI: Female BNC.
Formats: 720p @ 50, 59.94 & 60 Hz.
1035i @ 59.94 & 60 Hz.
1080i @ 50, 59.94 & 60 Hz.
1080p @ 23.97, 24, 25, 29.97, 30 & 60 Hz.
1080sF @ 50, 59.94 & 60 Hz.
* NOTE * : Specific Analog Way DB9 cable (Ref: AW10120)
shipped with every optional OPT-8044VO card.
Data rate: 1.54 Gbps serial digital - SMPTE 292M
2.97 Gbps serial digital - SMPTE 424M
Impedance: 75 ohms.
DVI-D: Female DVI-D.
Signal: Digital Visual Interface (DVI)-TMDS single link.
16