Analog Way Di-VentiX II User Manual
Page 42
In the Control Menu, you will find all setup which cannot be classified in the image, layer, input or output
menu.
Version:
it indicates the actual software version of the Di-Ventix II.
it can help if you need to contact our technical support team.
RS232/LAN:
choose your connection type when controling by a R.C.S or an external program.
LAN SETUP:
in this menu, you can adjust every settings reluted in the network
Auto Take
:
allow the unit to take by itself as soon as it detects a change (source, layer, position...)
Preset Toggle:
enable this feature to put you last program on your preview after a Take
Auto Lock:
enable/disable the source selection when no-synch are detected
Zoom Finder:
enable a powerfull help when using the input zoom. A white square will help you
to find the exact zoom area
Key Locking:
enable to lock a part or all your front panel
LPIO/Tally:
use this feature if you want to send a signal to other device as cameras
LCD Brightness:
adjust the LCD Brightness
Key Brightness:
adjust the Key Brightness
Erase Memories:
erase all image settings: blanckings, colors...
Erase Logos/Frames:
select your logos/frames to erase
Default values:
put every internal values to factory default (except Ethernet values).
Using the Control Menu
40