Analog Way Di-VentiX II - Manual (Page 35)

The use of layers on the Di-VentiX II will help you to create stunning
shows by fine tuning all the parameters of any of your sources to
achieve what it is you want to do with your Di-VentiX II . Once your
inputs have all been configured, you can affect them to any of the
four available layers to position them on the screen, size them, adjust
color and transparency, use or create presets to animate them (see
also “Working With Layer Functions”, p34).
1/ In the «Layer» section, press the layer button of the layer you wish
to work with (A-D). The button will start blinking. On the preview
screen, the layer will appear as a blinking color rectangle, and the
selected layer letter will be indicated in the layer rectangle. Layer
parameters will appear on your menu screen once a source has
been selected.
2/ In the «Input/Frame» section, press the [ SOURCE] button (#1
to #8) of the source you wish to affect to the selected layer. The
[ SOURCE] button will start blinking. On the preview screen, the
source will appear in the layer rectangle, and A01 will be indicated
in the layer rectangle (where A is the layer, and 01 is the source
affected to that layer).
3/ Press the layer button, then rotate the corresponding knob to
access desired layer attributes (size, position, zoom, border,
transparency...) and press the corresponding [SET] button in the
Layer sub-menu to enter and parameter layer attributes.
Working with Layers
33
4/ By pressing the [INPUT/FRAME] button you have affected to the
current layer a second time, the Image sub-menu appears on
your menu VFD screen. Rotate the corresponding knob to access
the desired source attributes (aspect in/out, color, centering,
blanking adjust...) and press the corresponding [SET] button in
the Image sub-menu to enter and parameter source attributes.
If you have any aspect ratio problem, please refer to the chapter
‘D - Di-VentiX II aspect ratio’ in the appendix section.
5/ Press the [TAKE] button to view the results on the main screen.