Analog Way Di-VentiX II - Manual (Page 54)

The RCS software for your Di-VentiX II can be viewed as the software version of the Di-VentiX II front panel
menu section. It allows you to quickly access all of the Di-VentiX II functions via a single page interface, and
easily edit your settings directly from your laptop or PC.
Before starting with the RCS software, you must establish a connection from your laptop to the
Di-VentiX II
you wish to run.
Before you can use the RCS application you must first configure the type of connection you are going to use.
The RCS software for your Di-VentiX II is composed of several easily identified sections. The tabs menu
(1) allows you to navigate through the equivalent of the Di-VentiX II front panel menu items (see also “The
Di-VentiX II menu”). The green window of the RCS (2) represents your Preview window, and can be used to
parameter sources, frames, layers and logos directly by clicking on the corresponding button, then navigating
through the different available tabs. The red window of the RCS (3) represents your Main window, and can also
be used much like the front panel of the
Di-VentiX II . Create user presets directly in the RCS main window, by
clicking on one of the four available Preset icons (4) and setting up your preset in the Preview window. Clear
unwanted steps with the
[CLEAR] button (5), reload a fresh copy of your screen via the [RELOAD MAIN]
button (6), make smooth takes directly with your mouse or trackpad with the virtual T-bar (7). The [ TAKE]
button (9) will allow you to view any changes made to your preview screen on your main screen, Analog Way
engineers have even implemented a
[ STEPBACK] button (8) to quickly return to your previous setup in case
of a manipulation error. The status section (10) allows for easy monitoring of the connection status.
Software overview
4
5
6
2
3
7
8
9
10
1
52