Analog Way Di-VentiX II User Manual
Page 61
6)
Then adjust and size each input so that they are full screen in the test pattern.
-
For computer sources: click on the Centering button in the Image main tab. As required, adjust
the position with the H & V position adjustments.
-
For video sources: Select the Image main tab and adjust the position with the H & V position
adjustments.
7)
On the Mode tab, select the Horizontal or Vertical edge blending mode by clicking on the horizontal or
vertical button.
8)
Display a Black screen (click on the
[BLACK]
button in the input selection row) and choose the Cove-
ring Pattern in the Pattern list.
* NOTE *: Verify that the Softedge is not enable (Enable Softedge button not activates).
9)
Adjust the Covering size so that the test pattern overlaps each other at the junctions of the projectors.
• Example: Test pattern in horizontal SE configuration.
This operation is to match physical covering with software covering value used for calibration of the source
covering image area.
59