FlexLink XT (макс. 30 кг) Монтаж - Manual (Page 48)

48 5113235
Mounting sensor bracket XTPB H001
Introduction
The sensor is not included in sensor bracket XTBP
H001. Mount the bracket on the outside of conveyor
XT or XT Compact.
Tools
Instruction
Allen key 3 mm
Allen key 5 mm
1 Insert the slot nuts (2 x M6) in the conveyor T-
slot. Fit the screws (2 x M6). The arrow shows
the upper holes for fitting on XT Compact
conveyor.
2 Use the 5 mm Allen key to tighten the screws.
3 Fit the sensor to the sensor bracket. Tighten the
screws. Use the 3 mm Allen key.