FlexLink YOUTILIZE - Manual (Page 117)

Providing production efficiency
Page 117 of 125
Wear (1.2)
Reference
point
Nominal
measure
Inspection
measure
Picture 2: Measure, Thickness of chain top
Gap, chain-side plate, idler end (Gap_idler)
• Measure_Inspection
Gap_idler
The inspection value is increasing due to wear of the components. This wear distance is the sum
of the wear of the slide rail (idler) and the chain (tab).
Wear (1.3)
Inspection
measure
Nominal
measure
Reference
point
Picture 3: Gap, chain-side plate (idler end)
Thickness of tab (Chain_tab)
• Measure_Inspection
Chain_tab
The inspection value is decreasing due to wear of the chain (tab).
Formatted: Danish