FlexLink YOUTILIZE - Manual (Page 59)

Providing production efficiency
Page 59 of 125
Figure 73
Click ‘Add’ and select ‘Motor’.
Figure 74
Under ‘Properties’ enter information as described below:
• PLC Item Index: This is also known as the Tag in the PLC.
• FlexLink Identifier: Identifying name FlexLink uses to describe the motor.
• Name: Name used to identify the item in the iMonitor Express GUI.
• Description: Field for entering a description for the device.
• Enabled: Checked by default and should remain checked.
• Controller: Populated with information relative to the ‘Current Controller’ setting.
• Motor Type: Type of motor connected to the PLC.
Repeat the above steps for adding a new motor for each Motor controlled by the ‘Current
Controller’