FlexLink YOUTILIZE - Manual (Page 63)

Providing production efficiency
Page 63 of 125
Figure 80
Under ‘Properties’ enter information as described below:
• PLC Item Index: This is also known as the Tag in the PLC.
• Route Index: Not required for Youtilize leave as is. Factory model required with routing
information.
• FlexLink Identifier: Identifying name FlexLink uses to describe the Work Station.
• Name: Name used to identify the item in the iMonitor Express GUI.
• Description: Field for entering a description for the device.
• Enabled: Checked by default and should remain checked.
• Use Internal Routing: If the routing is controlled by FlexLink and simple reported to iMontor
Express then this option should be enabled. If this option is disabled the following additional
options will be added under properties.
Figure 81
Under ‘Decision Point Properties’ enter information as described below: