FlexLink YOUTILIZE - Manual (Page 61)

Providing production efficiency
Page 61 of 125
• Controller: Populated with information relative to the ‘Current Controller’ setting.
• Collect Performance Metrics: Check if performance metrics will be provided by this
function.
• Function Type: Select the type of function connected to the PLC.
• Lane 1: Not required for Youtilize leave as is. Factory Model required with routing
information.
• Lane 2: Not required for Youtilize leave as is. Factory Model required with routing
information.
Repeat the above steps for adding a new motor for each Function controlled by the ‘Current
Controller’
New Analog Device
Make sure you have the correct ‘Current Controller’ selected.
Figure 77
Click ‘Add’ and select ‘Analog Sensor’
Figure 78