FlexLink YOUTILIZE - Manual (Page 24)

Providing production efficiency
Page 24 of 125
GE Fanuc PLC OPC Server No http://www.matrikonopc.com/opc-
drivers/opc-ge-plc-fanuc/base-driver-
details.aspx
Honeywell HC900 OPC Server No http://www.matrikonopc.com/opc-
drivers/opc-hc900/base-driver-details.aspx
Mitsubishi OPC Server No http://www.matrikonopc.com/opc-
drivers/opc-mitsubishi/base-driver-
details.aspx
Modbus (Modicon) OPC Server No http://www.matrikonopc.com/opc-
drivers/opc-modbus/base-driver-details.aspx
OMRON OPC Server No http://www.matrikonopc.com/opc-
drivers/opc-omron/base-driver-details.aspx
Siemens S7 PLC OPC Server Yes http://www.matrikonopc.com/opc-
drivers/opc-siemens-s7-plc/base-driver-
details.aspx#html
Siemens SIMATIC TI505 OPC
Server Yes http://www.matrikonopc.com/opc-
drivers/opc-simatic-ti505/base-driver-
details.aspx#html
Matrikon OPC Genie No http://www.matrikonopc.com/drivers/base-
driver-details.aspx?dId=162
Matrikon Sales
The following link provides details for ordering the Matrikon software.
• http://www.matrikonopc.com/products/opc-drivers/ordering-information.aspx
Installation Procedure
The following details the installation of the Matrikon OPC Server.
NOTE: If UAC (User Access Control) is enabled it is a good idea to install using the ‘Run as
Administrator’ Option accessible by right clicking on the installation program and selecting ‘Run as
administrator’ as shown below:
Figure 22
After selecting ‘Run as administrator’ you will be presented with a dialog asking to confirm that you
have allowed the installation program to make changes to your system.